in materials testing."/>

Phone: 719.694.8040
Fax:   888.809.3867
  info@extensometry.com

Image description goes here Image description goes here Image description goes here

澳洲幸运10官方直播网址-澳洲幸运10开奖记录查询结果记录 for Materials Testing

Models to Cover Virtually Every Materials Testing Application
Project

Axial Extensometers

Models for Tensile, Compressive and Cyclic Strain Measurement

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
menu

Deflectometers

Measurement of Deflection, Compression, and Bending tests

  • Large variety of measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Custom brackets / mounts available
menu

Fracture Mechanics, COD Gages

For fatigue Crack Growth and Fracture Mechanics Tests

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Bolt-on knife edges and accessories available


Project

Transverse Extensometers

For Transverse or Diametral Strain Measurement

  • Designed for simultaneous use with an axial extensometer for Poisson's ratio tests
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Special anvils available for testing soft materials
menu

High Temperature Extensometers

For Testing at Elevated Temperatures

  • Large variety of gage lengths and measuring ranges
  • For use up to 1200 °C (2200 °F) without cooling
  • Test metals, composites, and ceramics heated with a furnace or an induction heating system
menu

Bolt Proof Test Extensometers

Load Testing of Bolts and Similar, Yield / Proof Testing

  • Built-in mechanical over-travel stops and a break-away lower arm
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Gage length extension beams available for testing bolts greater than 150 mm (6.000") long
Project

Miniature Axial Extensometers

Miniature Models for Testing Small Specimens

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
menu

High Elongation Extensometers

Designed for Testing Plastics, Rubber, and Elastomers

  • Large variety of gage lengths and measuring ranges
  • Can be configured for low or high level output
  • Custom brackets / mounts available
menu

Extensometer Calibrators

For Calibration of Extensometers and Electronics

  • Two high resolution versions available
  • Large selection of adapters for transverse, COD gauge, etc.
  • Optional motorized version to automate your calibration process
Project

Avg / Bi-Axial Extensometers

Averaged & Simultaneous Bi-Axial Measurement in One Integral Unit

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
menu

Stand Alone Signal Conditioning

Signal Conditioners for Extensometers and Transducers

  • Highly adjustable for sensitivity, gain, filtering and output
  • NEMA 4 fully enclosed case
  • Output signal interface connectors for most controllers / test systems
menu

Sheet Metal Extensometer

For Measuring Plastic Strain Ratio of Sheet Metals

  • For r-Value measurment
  • Can be used simultaneously with a model EAG axial extensometer for ASTM E517 and ISO 10113
  • Temperatures from -270 to +200 °C (-454 to +400 °F)

Reliant Technology LLC.

2334 E Boulder Street

Colorado Springs, CO 80909 USA

+1-719-694-8040

Questions or Repair?

If you have any questions or would like a quote, please contact us HERE.

If your extensometer is in need of service or repair, please fill out an RMA form HERE.

极速赛车官网开奖历史 澳洲幸运5开奖号码结果 澳洲幸运5开奖官网直播 澳洲幸运8开奖直播官方 澳洲幸运10开奖官网授权 极速赛车官app官网下载 sg飞艇官网开奖结果 幸运飞飞艇官网开奖结果app下载 sg飞艇官网开奖结果 极速赛车开奖结果 澳洲幸运10开奖官网授权